Trichloroethylene Detection Tubes 2/a (2 - 250 ppm)
For short-term measurements more than 160 Draeger-Tubes are available to measure the spot concentrations of specific gases. Measurement usually takes between 4 seconds and 15 minutes. The tubes are used either manually with the Draeger-Tube Accuro Pump or automatically with the Draeger X-act 5000.
A wide range of different gases and vapors can be detected and measured, such as:
- Determining and measuring concentration peaks
- Measuring personal exposure in the inhalation area
- Detecting leaks in pipelines, gas installations etc.
- Air analysis in sewers, shafts and confined spaces
Trichloroethylene Detection Tubes 2/a (2 - 250 ppm)
Standard Measuring Range: |
20 to 250 ppm / 2 to 50 ppm |
Number of strokes n: |
3 / 5 |
Time for Measurement: |
approx. 1.5 min / 2.5 min |
Standard Deviation: |
± 10 to 15 % |
Color Change: |
pale gray ??> orange |
Temperature: |
10 to 40 °C |
Absolute Humidity |
5 to 15 mg H2O / L |
Reaction Principle: |
Cl2 + o-tolidine ??> orange reaction product |
Cross Sensitivity: |
Other chlorinated hydrocarbons are indicated, but with different sensitivities.
Free halogens and hydrogen halides in the TLV range are also indicated. It is impossible to measure trichloroethylene in the presence of these substances. Petroleum hydrocarbons cause low readings. |
Trichloroethylene Detection Tubes 2/a (2 - 250 ppm)
There are no reviews yet.