Carbon Disulfide Detection Tubes 30/a (32 - 3200 ppm)
For short-term measurements more than 160 Draeger-Tubes are available to measure the spot concentrations of specific gases. Measurement usually takes between 4 seconds and 15 minutes. The tubes are used either manually with the Draeger-Tube Accuro Pump or automatically with the Draeger X-act 5000.
A wide range of different gases and vapours can be detected and measured, such as:
- Determining and measuring concentration peaks
- Measuring personal exposure in the inhalation area
- Detecting leaks in pipelines, gas installations etc.
- Air analysis in sewers, shafts and confined spaces
Carbon Disulfide Detection Tubes 30/a (32 - 3200 ppm)
| Standard Measuring Range: |
0.1 to 10 mg/L |
| Number of Strokes (n): |
6 |
| Time for Measurement: |
approx. 1 min. |
| Standard Deviation: |
±15 to 20 % |
| Color Change: |
pale blue ?> brown |
| Temperature: |
0 to 40° C |
| Absolute Humidity: |
< 30 mg H2O / L |
| Reaction Principle: |
2 CS2 + 4 NHR2 + Cu2+ ?>
Cu(SCSNR2)2 + 2 NH2R2+ |
| Cross Sensitivity: |
Hydrogen sulfide is indicated, producing a pale green discoloration. It is impossible to measure carbon disulfide in the presence of hydrogen sulfide. |
Carbon Disulfide Detection Tubes 30/a (32 - 3200 ppm)
There are no reviews yet.