Monostyrene Detection Tubes 50/a (50 - 400 ppm)
For short-term measurements more than 160 Draeger-Tubes are available to measure the spot concentrations of specific gases. Measurement usually takes between 4 seconds and 15 minutes. The tubes are used either manually with the Draeger-Tube Accuro Pump or automatically with the Draeger X-act 5000.
A wide range of different gases and vapors can be detected and measured, such as:
- Determining and measuring concentration peaks
- Measuring personal exposure in the inhalation area
- Detecting leaks in pipelines, gas installations etc.
- Air analysis in sewers, shafts and confined spaces
Monostyrene Detection Tubes 50/a (50 - 400 ppm)
| Standard Measuring Range: |
50 to 400 ppm |
| Number of strokes n: |
2 to 11 |
| Time for Measurement: |
max. 2 min |
| Standard Deviation: |
± 30 % |
| Color Change: |
white ??> yellow |
| Temperature: |
10 to 40 °C |
| Absolute Humidity: |
< 15 mg H2O / L |
| Reaction Principle: |
C6H5-CH=CH2 + H2SO4 ??> yellow reaction product |
| Cross Sensitivity: |
Other organic compounds which tend toward polymerization (e. g. butadiene) are indicated. It is impossible to measure monostyrene in the presence of these compounds. |
Monostyrene Detection Tubes 50/a (50 - 400 ppm)
There are no reviews yet.