Oil Mist Detection Tubes 1/a (1 - 10 mg/m3)
For short-term measurements more than 160 Draeger-Tubes are available to measure the spot concentrations of specific gases. Measurement usually takes between 4 seconds and 15 minutes. The tubes are used either manually with the Draeger-Tube Accuro Pump or automatically with the Draeger X-act 5000.
A wide range of different gases and vapors can be detected and measured, such as:
- Determining and measuring concentration peaks
- Measuring personal exposure in the inhalation area
- Detecting leaks in pipelines, gas installations etc.
- Air analysis in sewers, shafts and confined spaces
Oil Mist Detection Tubes 1/a (1 - 10 mg/m3)
| Standard Measuring Range: |
1 to 10 mg/m3
Discoloration compared to color standard. |
| Number of strokes n: |
100 |
| Time for Measurement: |
approx. 25 min |
| Standard Deviation: |
± 30 % |
| Color Change: |
white ??> brown |
| Temperature: |
10 to 30 °C |
| Absolute Humidity: |
< 20 mg H2O / L |
| Reaction Principle: |
Oil mist + H2SO4 ??> brown reaction product |
| Additional Information: |
After performing the required 100 pump strokes the reagent ampoule must be broken and the liquid carefully drawn onto the indication layer using the pump. |
Oil Mist Detection Tubes 1/a (1 - 10 mg/m3)
There are no reviews yet.