Xylene Detection Tubes 10/a (10 - 400 ppm)
For short-term measurements more than 160 Draeger-Tubes are available to measure the spot concentrations of specific gases. Measurement usually takes between 4 seconds and 15 minutes. The tubes are used either manually with the Draeger-Tube Accuro Pump or automatically with the Draeger X-act 5000.
A wide range of different gases and vapors can be detected and measured, such as:
- Determining and measuring concentration peaks
- Measuring personal exposure in the inhalation area
- Detecting leaks in pipelines, gas installations etc.
- Air analysis in sewers, shafts and confined spaces
Xylene Detection Tubes 10/a (10 - 400 ppm)
| Standard Measuring Range: |
10 to 400 ppm |
| Number of Strokes (n): |
5 |
| Time for Measurement: |
approx. 1 min |
| Standard Deviation: |
20 to 30 % |
| Color Change: |
white ??> red brown |
| Temperature: |
0 to 40 C |
| Absolute Humidity: |
3 to 15 mg H2O / L |
| Reaction Humidity: |
C6H4(CH3)2 + HCHO + H2SO4 ??> quinoid reaction product |
| Cross Sensitivity: |
Styrene, vinyl acetate, toluene, ethyl benzene and acetaldehyde are indicated, but with different sensitivities.
No interference by:
- 500 ppm octane
- 200 ppm methanol
- 400 ppm ethyl acetate
|
Xylene Detection Tubes 10/a (10 - 400 ppm)
There are no reviews yet.