Pentane Detection Tubes 100/a (100 - 1500 ppm)
For short-term measurements more than 160 Draeger-Tubes are available to measure the spot concentrations of specific gases. Measurement usually takes between 4 seconds and 15 minutes. The tubes are used either manually with the Draeger-Tube Accuro Pump or automatically with the Draeger X-act 5000.
A wide range of different gases and vapours can be detected and measured, such as:
- Determining and measuring concentration peaks
- Measuring personal exposure in the inhalation area
- Detecting leaks in pipelines, gas installations etc.
- Air analysis in sewers, shafts and confined spaces
Pentane Detection Tubes 100/a (100 - 1500 ppm)
| Standard Measuring Range: |
100 to 1,500 ppm |
| Number of strokes n: |
1 |
| Time for Measurement: |
approx. 15 sec |
| Standard Deviation: |
± 15 to 20 % |
| Color Change: |
white ??> brown green |
| Temperature: |
0 to 40 °C |
| Absolute Humidity: |
1 to 40 mg H2O / L |
| Reaction Principle: |
C5H12 + I2O5 ??> I2 |
| Cross Sensitivity: |
Alcohols, esters, aromatics, petroleum hydrocarbons and ethers are indicated, but with different sensitivities. It is impossible to differentiate between them. |
Pentane Detection Tubes 100/a (100 - 1500 ppm)
There are no reviews yet.