Dräger FPS-COM PLUS
The Draeger FPS-COM PLUS communication unit was specifically developed for the Draeger FPS 7000 full face mask. It is mounted to the visor frame and is therefore fully integrated. For clear audibility by voice amplifier or radio- even under extreme conditions.
Benefits:
Voice only - nothing else - The microphone of the FPS-COM-PLUS picks up the wearer's voice inside the mask. The newly developed digital noise reduction technology filters out any interference that may reach the microphone inside the mask or any acoustic feedback that may occur. Pure breathing sounds are not transmitted to the voice amplifier or the radio.
No unintentional switching on and off - The ON/OFF switch of the FPS-COM-PLUS can only be operated by applying deliberate pressure to the switch. It is also equipped with a protective rim on one side.
High reliability, low costs - You forgot to turn off the FPS-COM-PLUS after work? Not a problem: the communication unit shuts off automatically, if no breathing sounds are received by the microphone for at least ten minutes (after a pre-notification signal). The automatic shutoff, after a three time pre-warning, increases battery life, lowers maintenance costs, and ensures equipment is ready for use when needed.
Open to different communication channels - Use the attached jack to connect the FPS-COM-PLUS to your radio via the external DraegerC-C400 push-to-talk button or the Draeger C-C500 remote speaker microphone (RSM). Alternatively, you can connect the FPS-COM-PLUS directly to the radio and use the built-in push-to-talk button.
- Easy to operate
- Low profile design for unobstructed view
- Built to resist shocks and impact
- Easy to see, bright LED lights: green (ready), red (not ready)
- Clear warning signal at 25% or 10% of remaining battery capacity (standard AAA)
- Easy retrofitting of existing FPS 7000 masks by replacing the lower visor frame
- Approvals: ATEX for use in explosive areas (Zone 0), EN 136, and EN 137 Type 2 (equipment for fire-fighting)
- External surround sound
- Can be ordered assembled to mask
- Compatible to the helm-mask-adapter
- Available direct cables : Waris, Jedi, Entel, and Niros
- Protection Class: IP67
Dräger FPS-COM PLUS
| Weight: |
depending on model 250 - 320 g
(without battery) |
| Approvals: |
ATEX :
-II 1G Ex ia IIC T5/T4 Ga (-30°C ≤ Ta ≤ +40°C/+60°C)
-II 1D Ex ia IIIC T95°C/T130°C Da IP6x (-30°C ≤ Ta ≤ +40°C/+60°C)
IECEx :
-Ex ia IIC T5/T4 Ga (-30°C ≤ Ta ≤ +40°C/+60°C)
-Ex ia IIIC T95°C/T130°C Da IP6x (-30°C ≤ Ta ≤ +40°C/+60°C)
EN:
EN 136 Klasse 3, EN 137 |
| Battery Types: |
AAA, Duracell PLUS or Duracell PROCELL
(only due to ATEX approval) |
| Operation Time: |
4 to 24 hours (depending on usage profile,
the operating time may be greatly reduced
at extreme temperatures). |
Ambient Conditions
for Storage: |
-15 °C to +25°C, 700 to 1300 hPa,
10 to 95% rel. humidity |
| Protection Class: |
IP 67 |
| Additional Notes: |
Developed for the Draeger FPS 7000 full
face mask. |
Dräger FPS-COM PLUS
There are no reviews yet.