Portable Decon Shower System
The FSI DAT 2525S Decon Shower System handles a single line of ambulatory casualties in three sequential stations --- (1) undress, (2) shower (3) redress. This unit deploys in under two minutes, and processes three ambulatory personnel at a time (one in each stage of the unit).
Undress and redress stations are dry (plumbing is possible and optional); the middle shower station includes 7 shower heads (2 sections of 3 shower heads and one overhead shower head) & 2 hanging coiled ½” hose lines w/ attached multiple function trigger guns which thoroughly drench & decontaminate via a fine water mist for a total of 9 shower heads as standard. Shutoffs and quick disconnects supplied w/ every group of shower heads & trigger gun. Flows per shower head & per spray gun = approx. 1 gpm optimum and dependent on water volumes available. As an option -- by configuring the changing areas on both ends as Decon showers one can double the capacity as detailed above.
Wastewater is contained within integral ground floor and 6” berm erected when system is initially inflated (holds approx. 80 gallons of waste water before pump-out is required).
Simply inflate the unit and plug into a water supply. DAT 2525S offered with integral ground floor, 1 – ¾” high pressure 300 psi GHT threaded inlet hose. Decontamination can commence in 1 - 2 minutes.
This shower system includes:
- Full closure slip in and out dirty entry/clean exit doors on each end
- (2) ½ cross divider curtains
- (2) Roll up windows (one on each side)
- (2) Skylights
- Air inflation/deflation valve
- Air inflation hose w/ safety cord
- High pressure valve
- High pressure relief valve
- (6) Metal stakes & Ground anchor points
- Tie down ropes
- (4) D-Rings
- Repair kit
- Manual
- Shelter sleeve
- (2) Upper air vents
- (8) 19” dia. HVAC/dirty clothes ducts w/ tie closures – 2 each on each end/side
- Small electrical duct
- Hammer
- Electric inflator/deflator
- High pressure SCBA fitting
Portable Decon Shower System
| DAT2525S |
| Measurements: |
one - line wide 7' W X 13’ L X 8’ H
3 station - 4’L, 5’L, 4’L
Approx. 91ft2 |
| Weight: |
180 lbs. |
| Carton Size: |
48” L X 43” W X 30” H |
| Air pressure internally once inflated: |
4.3 psi |
| Total Weight: |
1055 g/m2 |
| Thickness: |
0.90 mm |
| Cut strip tensile strength: |
Warp = 450 lbs/in
Weft = 404 lbs/in |
| Elongation: |
Warp = 30%
Weft = 47% |
| Tongue tear: |
Warp = 87 lbs
Weft = 100 lbs |
| Adhesion: |
Warp = 9.4 lbs/in
Weft = 8.9 lbs/in |
| Density: | 30 X 24.5 |
| Certifications: |
ANSI 113-200X compliant |
| Frame |
| Material: |
- Heavy Duty 1100 Dtex polyester coated w/ plastomer on both sides
- UV/Chemical resistant
- Quadruple overlapped and glued. |
| Canopy |
| Material: |
- Heavy duty 100% nylon twill (3/5) w/ PU white pigment inner coating
- UV/chemical resistant/fire retardant
- UV resistant and water repellent w/ a hydrostatic resistance of 250 psi + -
- Anti fungus/Mildew resistant to meet and exceed US Fed. Test MIL.STD.810E 508 and 'ASTM G 21-96(2002)'
- Fire resistance meets and exceeds CPAI 84 SECTION 5 1995
- US Fed. Test CFR.1610
- Meets NFPA701 Flammability Test method 1 (2004)
- NFPA 702 w/ ‘A’ burn scale rating
- All seams double stitched and coated both sides. |
| Dimensions: |
Approx. 23mm X 57/58 |
| Weight: |
Approx. 1.230 gr/m2 |
| Inner Canopy |
| Material: |
- 100% Nylon 210T Antron Water Resistant Polyurethane Coated 57/58"
- Flame Retardant to meet 'NFPA-701 TM-1'
- Anti-fungus/Anti-mildew
- Opaque |
| Color: |
White |
| Floor |
| Material: | PVC of 0.58mm thickness (1,000 Dtex, 18 X 18 polyester) |
| Weight: |
660 gr/mm2 |
| Width: |
60 in |
Portable Decon Shower System
There are no reviews yet.