Portable Pneumatic Hazmat Decon Shower System
The DAT 3030S is a 2 line system designed to handle 2 non-ambulatory personnel on stretchers with attendants working on either side of the victim inside the unit, or the DAT3030S can handle 1 non-ambulatory and two ambulatory, or 4 ambulatory personnel at any one time. This shower system comes equipped as standard equipment with an integrally attached ground floor that will hold up to 200 gallons of water before requiring pump out
All canopy walls are velcro’d to the floor air berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit integral shower stall air berms. Units can attach to a second shower or FSI shelter. Simply inflate the unit - plug into a water supply and commence decon in 1 – 2 minutes.
The DAT 3030S also comes complete with a with a qty. of 14 spray nozzle heads and (4) 5’ lengths of coiled ½” hose w/ attached multiple function spray guns w/ shutoffs and quick disconnects offering spray patterns & flows meant to gently, yet thoroughly drench and decon victims. Flows per shower head and per spray gun = approx. 1 gpm optimum & dependent on water volumes available. As an option, one can double the capacity if required.
Simply inflate the unit and plug into a water supply - unit is offered with (2) ¾” high pressure 300 psi GHT threaded inlet hoses.
System includes:
- (2) Roll up windows - one on each side
- (2) Skylights
- Full closure slip in and out dirty entry/clean exit doors
- (8) 19” dia HVAC/clothes inlet/outlets with tie closures – 2 each on each end/side
- Small electrical duct
- Center divider curtain
- (2) 1/2 Cross divider curtains
- Air inflation/deflation Valve
- Inflation hose w/ safety cord
- Pressure Relief Valve
- (4) Metal stakes & ground anchor points
- Tie Down Ropes
- (4) D-Rings
- Repair kit
- Manual
- Shelter sleeve
- (2) Upper air vents
- Hammer
- Electric inflator/deflator
- High pressure SCBA fitting
Portable Pneumatic Hazmat Decon Shower System
| DAT3030S |
| Measurements: |
Approx. 10’ W X 10’ L X 9’ H
Approx. 100 sq. Ft. |
| Flow rate: |
8 gpm |
| Weight: |
139 lbs. |
| Carton Size: |
52” L X 43” W X 27” H |
| Air pressure internally once inflated: |
4.3 psi (0.3 bar) |
| Total Weight: |
1055 g/m2 |
| Thickness: |
0.90 mm |
| Cut strip tensile strength: |
Warp = 450 lbs/in
Weft = 404 lbs/in |
| Elongation: |
Warp = 30%
Weft = 47% |
| Tongue tear: |
Warp = 87 lbs
Weft = 100 lbs |
| Adhesion: |
Warp = 9.4 lbs/in
Weft = 8.9 lbs/in |
| Density: | 30 X 24.5 |
| Certifications: |
ANSI 113-200X compliant |
| Frame |
| Material: |
- Heavy Duty 1100 Dtex polyester coated w/ plastomer on both sides
- UV/Chemical resistant
- Quadruple overlapped and glued. |
| Canopy |
| Material: |
- Heavy duty 100% nylon twill (3/5) w/ PU white pigment inner coating
- UV/chemical resistant/fire retardant
- UV resistant and water repellent w/ a hydrostatic resistance of 250 psi + -
- Mildew resistant to meet and exceed US Fed. Test MIL.STD.810E 508
- Fire resistance meets and exceeds CPAI 84 SECTION 5 1995
- US Fed. Test CFR.1610
- Meets NFPA701 Flammability Test method 1 (2004)
- NFPA 702 w/ ‘A’ burn scale rating
- All seams double stitched and coated both sides. |
| Dimensions: |
Approx. 23mm X 57/58 |
| Weight: |
Approx. 1.230 gr/m2 |
| Inner Canopy |
| Material: |
- 100% Nylon 210T Antron Water Resistant Polyurethane Coated 57/58"
- Flame Retardant to meet 'NFPA-701 TM-1'
- Anti-fungus/Anti-mildew
- Opaque |
| Color: |
White |
| Floor |
| Material: | PVC of 0.58mm thickness (1,000 Dtex, 18 X 18 polyester) |
| Weight: |
660 gr/mm2 |
| Width: |
60 in |
Portable Pneumatic Hazmat Decon Shower System
There are no reviews yet.