Portable Pneumatic Hazmat Decon Shower

Portable Pneumatic Hazmat Decon Shower

The FSI model DAT 3535S is a two-line wide (5' W, 5' W), 4 station mass casualty decon shower system which handles two parallel lines of casualties at the same time in four sequential stations --- (1) undress 4’ section, (2) detergent shower & (3) rinse shower in a 7’ section, (4) redress 4’ section. This unit deploys in under two minutes, and processes 2 or 4 ambulatory personnel at a time, and/or 2 non-ambulatory personnel at one time or any combination.

Undress and redress stations are dry (plumbing is possible and optional); each of the four shower stations include 3 showerheads and one hanging coiled ½” hose line with attached multiple function spray nozzle which thoroughly drenches and decontaminates via a fine water mist. There are a total of 4 multiple function spray nozzle guns and 4 sections of 3 shower heads for a total of 16 water discharge ports as standard. Shutoffs and quick disconnects supplied with every group of shower heads and trigger gun. As an option -- by configuring the changing areas on both ends as decon showers one can double the capacity as detailed above.

Wastewater is contained within integral ground floor and 6” high water berm when system is initially inflated (holds approx. 200 gallons of waste water before pump-out is required). All canopy walls are velcro’d to the floor air berms for air lock.

System includes:

• (4) Roll up windows (2 on each side)
• (2) Skylights
• Roll-up, full zip, dirty entry/clean exit doors
• 19" Air duct inlets/outlets w/ tie closures - 2 each on each end/side
• Small electrical duct
• (2) High pressure & (2) Low pressure inflation/deflation valves
• Air inflation hose w/ safety cord
• Pressure Relief Valve
• Metal stakes & ground anchor points
• Repair Kit
  
• Manual
• Shelter sleeve
• (2) Upper air vents
• Hammer