FSI DAT Series Pneumatic Shelter 25' W x 26' L x 12.5' H
All DAT series shelters are supplied fully equipped and ready to be placed in service. Simply roll out, inflate, tie/stake down, and commence operations
Every shelter with a width of over 11 ft - regardless of length and overall size offers a top center air berm running the entire length of the unit at the roof line and secondary full center length air berms running on either side of the main center berm approx. 18 - 24" off center.
All HVAC ducts are approx. 30” L X 19” diameter. All canopy walls are velcro’d to the floor air berms for air lock, and reflective striping is found on the upper air vents above entry and exit doors. Units can attach to a second FSI shelter or shower. Simply inflate the unit and commence use in approx. 1 - 4 minutes.
Possible Shelter Uses:
- Command
- Field hospital
- Medical surge capacity
- Temporary housing
- Portable morgue
- Athletic
- Training/cool down
- Isolation
- Crime scene privacy shelter
- Anteroom
Shelter includes:
- Triple top cross berm design for maximum strength and load bearing capability
- (6) windows – three on each side
- (3) Skylights
- (8) HVAC/Clothes inlet/outlets w/ tie closures - two each per end/side
- Full privacy zipper closure and full screen zipper closure slip in and out dirty entry/clean exit doors
- Air inflation valve
- Air inflation hose w/ safety cord
- Pressure relief valve
- Metal stakes
- (4) Tie down ropes
- (4) D-rings
- Repair kit
- Manual
- Carrying bag
- (2) Upper air vents
- Hammer
- Electric inflator/deflator
- High pressure compressed air fill hose
- Universal high pressure SCBA fitting
FSI DAT Series Pneumatic Shelter 25' W x 26' L x 12.5' H
DAT6500 |
Measurements: |
Approx. 25’ W X 26’ L X 12.5’ H - 650ft2 |
Weight: |
590 lbs. |
Air pressure internally once inflated: |
4.3 psi |
Total Weight: |
1055 g/m2 |
Thickness: |
0.90 mm |
Cut strip tensile strength: |
Warp = 450 lbs/in Weft = 404 lbs/in |
Elongation: |
Warp = 30% Weft = 47% |
Tongue tear: |
Warp = 87 lbs Weft = 100 lbs |
Adhesion: |
Warp = 9.4 lbs/in Weft = 8.9 lbs/in |
Density: | 30 X 24.5 |
Certifications: |
ANSI 113 compliant |
Frame |
Material: |
- Heavy Duty 1100 Dtex polyester coated w/ plastomer on both sides - UV/Chemical resistant |
Cover |
Material: |
- Heavy Duty 420 Denier nylon (or polyester) coated w/ polyurethane (PVC) on both sides. - UV/Chemical Resistant/Fire Retardant. |
Floor |
Material: | PVC coated 0.52mm Polyester |
FSI DAT Series Pneumatic Shelter 25' W x 26' L x 12.5' H
There are no reviews yet.