Quick Erect Portable Hazmat Decon Shower System

Quick Erect Portable Hazmat Decon Shower System

The DAT QE2020S comes equipped as standard equipment with an integrally attached ground floor and decon pool that must be set up and placed inside the unit - that will hold up to 100 gallons of water w/ an 8” berm before requiring pump out.

All canopy walls are velcro’d to the floor air berms for air lock, and reflective striping is found on the upper air vents above doors and on entry and exit air berms. Units can attach to a 2nd shower/FSI Shelter.

Simply set up the unit and plug into a water supply. DAT QE2020S offered with 1 – ¾” high pressure 300 psi GHT threaded inlet hose – other fittings available as specified. Decontamination can commence in less than 1 minute.

All parts are pre-assembled with no special tools required. All components are of interconnected scissor type connected expansion frame components.

To ‘Quick Erect’ simply have 2-4 support personnel grip side frame on each side. Pull the width support frames slowly – and then ease roof frame upwards with the push poles until locked in place. Check and final position canopy and floor. Commence use.

System includes:

• 7 Spray Nozzle Heads
  
• 5' length of coiled 1/2" hose w/ attached Multifunction Trigger Gun
• (2) Roll Up Windows - one on each side
• Skylight
• Full privacy zipper closure and full screen zipper closure slip in and out dirty entry/clean exit doors
• (4) Stainless steel stakes & ground anchor points
• 17" HVAC Hanging Duct
• Small electrical duct
• Tie down ropes
• (4) D-rings
• Repair Kit
  
• Manual
• Shelter sleeve
• (2) Upper air vents
• Hammer