BW RigRat Multi-Gas Area Monitor
Honeywell BW™ RigRat brings a new level of user-friendliness to transportable multi-gas area monitoring, so your people can work with confidence in hazardous areas. Simply place the monitor nearby, and it will alert workers to area gas threats so they can take action.
Grab and go. Like other Honeywell BW™ products, Honeywell BW™ RigRat is engineered for ease, with one-button operation. Simply turn it on and it's ready to deploy- no expertise required. Convenient handles and a carrying strap make it easy to take with you.
Unlike some transportable area monitors, Honeywell BW™ RigRat is fully self-contained - with no need to re purpose your personal gas detectors for an area monitoring application. Instead, continue using your personal detectors to monitor workers' breathing zone, while using Honeywell BW™ RigRat to monitor an area. .
Features & Benefits
- Wireless Safety Perimeter
- Remote monitoring
- Honeywell TouchPoint Plus Compatible
- Line Power for extended runtime in the field
- Inert mode that prevents alarm in normal ambient air
- Large, easy-to-read display
- Rugged, weatherproof design, with optional protective cage
- I/O ports providing additional input capabilities and local executive activation
Quick Specs
- 8 weeks of runtime on a single charge
- Up to 6 gas sensors
- Programmable input and output
- Simple smartphone setup
BW RigRat Multi-Gas Area Monitor
| Dimensions: |
15.8 x 11.4 x 18.5 in. / 40.0 x 29.0 x 47.0 cm |
| Weight: |
17.6 lb / 8 kg |
| Gas Sensor Slots: |
Up to 6 |
| Ambient Conditions: |
Temperature: |
-4 to +140°F (-20 to +60°C) for pumped models;
-40 to +140°F (-40 to +60°C) for diffusion models
|
| Humidity: |
5 - 95% RH (non-condensing) |
| Humidity: |
5 - 95% RH (non-condensing) |
| Alarm: |
Red/yellow/green LED alarm; buzzer alarm 108 dBA @ 1 m; on-screen indication of alarm conditions |
| Operating Time: |
8 weeks for low-power model; other models vary by configuration |
| Charging Time: |
Less than 18 hours when instrument is powered off |
| Keypads: |
One-button operation and programing |
| Display: |
3.5” 240 x 320 TFT color LCD with white LED backlight |
| Alarm: |
Potential-free alarm contact for instrinsically safe circuits (6-pole)
< 20 V to 0.25 A (0.15 A constant current)
Resisting load |
| Datalogging: |
ISM license free band:
Bluetooth Low Energy Module (BT 4.2 / 5.0), 2.4 GHz, in default;
Mesh Module: IEEE 802.15.4 868 MHz / 915MHz /2.4 GHz (optional); OR
Wi-Fi Module: 802.11 b/g/n 2.4 GHz (optional)
|
| Wireless: |
Complete gas sensors and instrument information for at least 4 months at one minute intervals |
| Radio Transmission: |
Bluetooth Low Energy: RMBLEC, up to 16.4 ft. / 5 m;
Mesh: RM900A, 984 ft. / 300 m (868-900 MHz) or RM2400, 492 ft. / 150 m (2.4 GHz );Wi-Fi: RMWIFIC, up to 164 ft. / 50 m; |
| Outdoor Locations: |
GPS receiver module: GPS L1 frequency (1575.42 MHz) (optional);
Only with IEEE 802.15.4 868 MHz / 915MHz modem and WIFI
|
| Safety Certifications: (Pending) |
cETLus Class I Division 1; Group A, B, C, D; T4;
IEC EX/ATEX
I M1 Ex ia I Ma
II 1G Ex ia da IIC T4 Ga
For LELIR/CO2 sensor installed:
I M1 Ex ia I Ma
II 2G Ex ia da db IIC T4 Gb
1G Ex ia da IIC T4 Ga
|
| Wireless Approvals: |
FCC Part 15, IC, RE-D |
| ROHS (Pending): |
RoHS Complaint, Directive (EU) 2015/863 |
| Noise Sensor: |
60-125 dBA range; (respond: 100 Hz to 8 kHz), 1 dB resolution;
A-weighted 15 second equivalent level; updated every 5 seconds |
BW RigRat Multi-Gas Area Monitor
There are no reviews yet.