Cal 2000 Electrochemical Calibration Gas Generator
Providing unmatched versatility and accuracy in certified calibration gases, the Cal 2000 from ACD uses field replaceable electrochemical generating sources to provide a calibration standard for accurately testing chlorine, chlorine dioxide, hydrogen, hydrogen cyanide, and hydrogen sulfide gas sensors.
The Cal 2000 is microprocessor controlled and has an LCD display allowing field adjustable ppm and flow rate. The generating cells are interchangeable and field replaceable. The Cal 2000 provides up to 50 times as much calibration gas as a disposable cylinder at approximately the same cost. Unlike calibration gases, the electrochemical generating cells do not degrade over time.
The Cal 2000 gas generator has a built-in mass flow sensor that automatically compensates for altitude and temperature. The mass flow sensor, combined with the instruments internal pump, provide extreme flexibility for calibrating both diffusion and sample draw detection systems.
Features:
- Compact design
- Low power consumption
- Alkaline battery powered
- Adjustable ppm and flow rate
- Automatic purge on shut down
- Interchangeable calibration gases
Cal 2000 Electrochemical Calibration Gas Generator
Specifications:
| Air Flow Rate (with internal pump) |
0.2 to 1 LPM |
| Sample draw rate (with pump disabled) |
0.2 to 5 LPM |
| Useful Cell Life |
50 or 100 hours |
| Warm-up time (to 90%) |
Approx. 5 minutes |
| L x W x H |
8.50 x 4.25 x 3.00" (21.59 x 10.8 x 7.62 cm) |
| Weight |
3 lbs (1360 g) |
| Operating Temperature |
0°C to 50°C |
| Relative Humidity (intermittent use) |
0-100% |
| Accuracy |
±10% |
| Repeatability |
±5% |
| Battery Power / Life |
4 alkaline "C" / 10 hours (at .5 LPM flow rate) |
Cal 2000 Electrochemical Calibration Gas Generator
Available Gas Sources:
Cal 2000 Electrochemical Calibration Gas Generator
There are no reviews yet.