identiFINDER R440 Radionuclide Identification Detector
The FLIR identiFINDER R440 is a lightweight, sourceless radionuclide identification device (RID) that delivers sensitive detection and fast results for routine survey or secondary screening response missions.
The 2x2” NaI (sodium iodide) detector responds to radiological threats from farther away, behind heavier shielding, and with better resolution than similarly-sized RIDs. The extended energy range provides neutron indication.
Its light weight makes single-handed operation easy during extended operations, while the IP67-rated enclosure is built to survive. The bold, easy-to-read interface with 360° EasyFinder™ mode expedites decision-making to keep personnel and the community safe.
Features:
- 3.5 times more sensitive with up to 10% better resolution than comparatively sized RIDs
- High dose rate range provides stability and accuracy even in high dose rate environments
- Two models: gamma only (with neutron indication); gamma and neutron detection and
measurement
- Sourceless stabilization improves data collection, reducing false positives.
- Protected from total dust ingress and water immersion (rain, splashing and accidental submersion) up to 1 meter in depth for up to 30 minutes
- ANSI N42.42 and ANSI N42.34 compliant
- Drop-tested up to 1 meter
- Completely enclosed crystal provides enhanced ruggedization
- 360° EasyFinder mode collects and interprets data and then pinpoints the exact location of source for user
- Built-in wireless communications
- Built for interagency standardization - common user interface provides familiarity for users of any identiFINDER product
identiFINDER R440 Radionuclide Identification Detector
| SYSTEM OVERVIEW |
| Data Storage |
32GB internal memory |
| Training Requirements |
<10 mins for operator; 1 day for advanced user |
| ENVIRONMENTAL |
| Operating Humidity |
10 to 93% |
| Storage Temperature |
14 to 95 °F (-10 to 35 °C) |
| PHYSICAL FEATURES |
| Dimensions (L x W x H) |
≤ 4 x 10.6 x 3.7 in (10.2 x 26.9 x 9.4 cm) - with battery |
| Weight |
≤3.2 lbs (≤1.5 kg) |
| Enclosure & Protection |
Aluminum housing; protection rating IP67 according to IEC 60529 |
| POWER |
| Battery Specs |
Supplied: 2x rechargeable Li-Ion smartpacks and 1x 4x AA pack; ≤6h runtime with one Li-Ion smartpack, ≤12h with both Li-Ion; runtime of ≤4h with AA battery pack (Li-ion);Optional rechargable NiMH ion smartpack with ≤5h runtime; recharge ≤4h when using AC; recharge >4h when using USB; run times specified are obtained with a mix of Dose Rate, Finder, and ID operating mode |
| Cold Start Time |
<2 mins from cold start |
| Input Voltage |
100-240V AC (wall adapter and USB cable supplied) |
| SAMPLING & ANALYSIS |
| Nuclide Identification |
According to ANSI N42.34 |
| Sample Introduction |
Absorption of EM gamma (NaI) or gamma and neutron emissions (NaIL) |
| Threats |
Detects neutron or gamma radiation emitted from natural occurrences in the environment, special nuclear material, industrial, or medical material |
| SYSTEM INTERFACE |
| Communication |
USB 2.0, USB OTG; Bluetooth® Class 2.0 ≤10m range (removable); WiFi 802.11 g/n |
| Software |
On-board webserver software |
| TECHNOLOGY |
| Energy Range [Gamma] |
10 keV to 10 MeV |
| Service Interval |
1 year factory maintenance suggested, not required |
| Stabilization |
Sourceless gain stabilization (patents pending) |
| Technology |
Radioisotope identification device (RIID) |
| Typical Resolution |
≤7% FWHM at 662 keV with NaI detector at 20 °C |
identiFINDER R440 Radionuclide Identification Detector
| R440-G |
Includes one 2x2 NaI detector for gamma radiation detection and radionuclide identification, digital signal processing electronics, no internal source, and features a 3” transflective color TFT display, web server, Bluetooth, USB connectivity, and Reachback capability. Standard unit includes two Li-ion battery packs and one AA user-serviceable battery pack. |
| R440-GN |
Includes one 2x2 NaIL detector for gamma and neutron radiation detection, radionuclide identification, digital signal processing electronics, no internal source, and features a 3” transflective color TFT display, web server, Bluetooth, USB connectivity, and Reachback capability. Standard unit includes two Li-ion battery packs and one AA user-serviceable battery pack. |
identiFINDER R440 Radionuclide Identification Detector
There are no reviews yet.