SDM-3R Bump Test & Calibration Station for GX-3R & GX-3R Pro
The SDM-3R Calibration Station automates bump tests and calibration service of a GX-3R & GX-3R Pro portable gas monitors. It can be used as a stand alone docking station for charging, calibration and bump testing or connected to a computer to operate in a bank of up to 10 instruments. To reduce the number of required demand flow regulators, SDM-3R stations may be manifolded together.
Data may be transferred via USB from standalone cradles. With the PC software, data retrieval may be automated. All records are stored automatically for future upload to a PC via the included USB flash drive and software. The datalogging from each instrument is save into one easy-to-manage location
Features:
- May operate as stand-alone station (no PC Required) or connected to a PC with up to 10 cradles
- Charge, calibrate, and bump test
- Save Bump Test and Calibration records either on jump drive or PC
- Includes PC software for viewing/archiving bump test and calibration records
- Multiple modules connected to a PC (10 max)
- Automatic calibration/bump test option
- Configure GX-3R (Pro) parameters
- Archive Bump Test and Calibration records
- Archive data to network location
- Software controlled data retrieval
SDM-3R Bump Test & Calibration Station for GX-3R & GX-3R Pro
|
Input Power
|
12 VDC NOTE: AC Adapter with 100 – 240 VAC, 50/60 Hz, 0.6A input and 12 VDC, 1.2A output provided as standard.
|
|
Environmental Conditions
|
• For Indoor Use Only
• -10° C to 40° C, below 80% Relative Humidity,
Non-Condensing
|
|
Applicable Instruments
|
GX-3R & GX-3R Pro
|
|
Maximum Number of Records Saved
|
200 (stand-alone). Unlimited with software
|
|
3 Ports
|
1 Calibration gas, 1 fresh air and 1 exhaust
|
|
Standard Accessories
|
• AC Adapter
• USB Flash Drive
• Single Module Data Viewer Software
• SDM GX Docking Station PC Controller Program
• Inlet Air Filter
• Instruction Manual
• 10 Foot Long Exhaust Tube
• One 3 Foot Long Tube for GAS Fitting
• 2 T-Fittings (for PC Controlled Configuration only)
• 10 Foot Long 3/16 Inch Tube for GAS manifold-
ing (used for PC Controlled Configuration only)
• Check Valve (used for PC Controlled
Configuration only)
• USB Cable, Type A to Type B
|
SDM-3R Bump Test & Calibration Station for GX-3R & GX-3R Pro
There are no reviews yet.